2023 Exmark LZS801CKA60RA1 60" Kawasaki

Call for Price

Call for Price

Key Features

New/Used New
Usage0 Hours
Availability In Stock
LocationTri-State Rental
Primary Colorred
Condition Excellent

Product Features

Description

With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.



Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders, and machine health status. Like our full lineup of zero-turn mowers, the Lazer Z S-Series offers unparalleled durability and precision maneuverability. Be sure to check out the rest of the Lazer Z family of mowers, like the Lazer Z X-Series zero-turn mowers.

Features
  • Less Time At The Pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location.
  • Built to Last: Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
  • On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75 in.-diameter cutter housing with 25mm (.98 in.) diameter spindle shaft and splined blade driver.
  • Drive Tires: 24 x 12-12, 4 ply Turf Master®
  • Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Caster Forks: .50 in. thick caster yoke arms.
  • Tractor Frame: Unibody, welded, heavy-duty 1.5 in. x 3 in. tubular steel.
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Parking Brake: Lever-actuated disc brake.
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Electrical: 12-volt battery with 15-amp alternator.
  • Standard Features: Engine hour meter and cup holder
Power Components
  • Engine Brand: Kawasaki
  • Engine Model: FX801V
  • Engine Displacement: 852
  • Engine Series: V-Twin
  • Engine Speed: 3,750 RPM
  • Air Filter: Heavy-duty canister air filtration system
  • Fuel Type: Gas Carbureted
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Fuel Indicator: Yes - electronic Sender
  • Drive: Hydro-Drive
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
  • Carb Compliant: Yes
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Drive Wheel Release: Allows unit movement without engine running.
  • Engine Spec: _S04
Decks
  • Width / Cutting Deck: 60 in.
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
  • Deck Construction: 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Cutting Heights: 1.0 in. (2.5 cm) to 5.5 in. (11.8 cm) in 0.25 in. (0.64 cm) increments adjustable from operator's seat.
  • Blades: 3 Blades at 20.50 in. Length
Dimensions
  • Width: 66.2 in. (168.1 cm)
  • Length: 79.2 in. (211.1 cm)
  • Height: 70.5 in. (179.1 cm)
  • Curb Weight: 1287
Lazer Z S-Series Accessories
  • Hitch Kit: Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.
  • LED Light Kit (not compatible with TC26): Light Kit
  • Hydro Maintenance Kit: Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)
  • Finish Cut Baffles: Maximize cut quality in the toughest conditions with this finish cut baffle kit.
  • 12-Volt Power Port: 12-Volt Power Port
  • Equipment Cover: Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
  • Extended Drive Lever Kit: Improve your elbow room while you operate with extended drive levers.
  • Harness Add-On Accessory Kit: Take the hassle out of dual accessory fit up with this add-on harness.
  • Trash Container (Not compatible with 135-7320): Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.
  • Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
  • Jack Mount Receiver: Safely access the underside of your zero-turn mower's deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.
  • Anti-Scalp and Side Wear Bar Kit: Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.
  • Sun Shade (ROPS): Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
  • Floor Mat: Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).
  • Power Deck Lift: Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.
  • Tractus Tire: Tractus Tire
  • White Non-Marking Side Bumper (requires 3231-7 & 104-8301): White Non-Marking Side Bumper(requires 3231-7 & 104-8301)
  • Air Ride Suspension Seat: Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

Engine

Engine Manufacturer Kawasaki
Engine Type FX801V
Displacement 852cc

General

Transmission Hydro-Drive
Wheel Size 24 x 12-12, 4 ply Turf Master®
Fuel Capacity 12 gal. (45.4 L)

Deck

Deck Size 60 in.
Discharge Type Rear; Optional: Mulch

Shopping Tools